General methods of manufacture of refractories
The manufacture of refractories involve the following steps.
1. Grinding
Raw materials crushed and ground to fine powder using crushers, pulveriser, ball mills.
2. Mixing
In order to alter the chemical properties of the refractories, two or more powdered raw materials are thoroughly mixed with a suitable binding material, which makes moulding easier.
3. Moulding
Moulding can be done either manually or mechanically by application of high pressure.
Hand-moulding produces refractories of low strength and low density. Mechanical-moulding produces refractories of high strength and high density
4. Drying
Drying is carried out slowly to the moisture from refractories.
5. Firing
It is done at a temperature as high as or higher than their use temperature . Firing is generally carried out in kilns.
The refractories are fired,
(i) to stabilize and strengthen their structures.
(ii) to remove water of hydration.
(iii) to facilitate development of stable mineral to form the finished products.
“Benjamin Briel Lee was very professional at all times, keeping me aware of everything that was happening, If I had any questions he was always available to answer. This was my first home purchase, I didn’t know much about the loan process, he made it very easy to understand the things I had questions about. I really enjoyed working with him.”
ReplyDeleteHe's a loan officer working with a group of investor's who are willing to fund any project or loan you any amount with a very low interest.Contact Benjamin Briel Lee E-Mail: lfdsloans@outlook.com Whats-App Number: +1-989-394-3740.